CE Approval RFID Card Lock(9000RL-M)

1\ CE Approval RFID Card Lock work with RFID card; 2\ work stable; 3\ low battery alarm 4\ mechanical key for emergency.

1\ CE Approval RFID Card Lock work with RFID card; 2\  work stable; 3\  low battery alarm 4\ mechanical key for emergency.

There is no any information for each new lock, when you slide up the cover, you will hear a long beep~~, the lock can be unlock when press the handle. (The unlock state will be remain in 3 seconds)

Users must REGISTER first, then use the lock normally.

Steps:

1. Slide up the coverlong beep~~,green light flash one time

2. Press for 3 seconds until hear a long beep~~

3. The screen of the back body will display ,

4. Press ,the screen of the back body will display ,(R--RFID card; P--Password;)

5. If select ,press for 3 seconds until hear a long beep~~, touch the RF-ID card,,when hear two beeps, it means the RF-ID card is already successfully registered

6. If select , press for 3 seconds until hear a long beep~~, enter password (4-12 digits) then press again,when hear two beeps, it means the password is already successfully registered.

7. Successfully registered: two beeps and green light flash;

Failed registered: three beeps and red light flash.

(If failed, please repeat the steps again carefully till successfully registered.)

*** The first 5 users are Master, all of the Masters can give permission to add fingerprint.

ID number:

The rest 195 users are ordinary user

ID number:

All of the Masters can give permission to add ordinary users.

Register RF-ID CARD

Steps

1. Slide up the cover

2. Verify the Master (RF-ID CARD or PASSWORD) to gain permission

3. Press for 3 seconds until hear a long beep~~

4. Press or to select ID numberMaster ID: Ordinary user ID:

5. Press ,the screen of the back body will display ,select

6. Press for 3 seconds,touch the RF-ID Card,Two beeps and green light flash, successfully registered; Failed registered: three beeps and red light flash.

Register PASSWORD

Steps

1. Slide up the cover

2. Verify the Master (RF-ID CARD or PASSWORD) to gain permission

3. Press for 3 seconds until hear a long beep~~

4. Press or to select ID numberMaster ID: Ordinary user ID:

5. Press ,the screen of the back body will display ,select

6. Press for 3 seconds,enter password (4-12 digits) then press again. Two beeps and green light flash, successfully registered; Failed registered: three beeps and red light flash.

Register RF-ID CARD + PASSWORD

Steps

1. Slide up the cover

2. Verify the Master (RF-ID CARD or PASSWORD) to gain permission

3. Press for 3 seconds until hear a long beep~~

4. Press or to select ID numberMaster ID: ID:

5. Press ,the screen of the back body will display ,select

6. Press for 3 seconds and touch the RF-ID card,one beep and green light flash,WITHIN 6 SECONDS, enter password (4-12 digits) then press again. Two beeps and green light flash, successfully registered; Failed registered: three beeps and red light flash.

ACCESS MODE

1. RF-ID CARD

2. PASSWORD

3. RF-ID CARD + PASSWORD

4. Emergency Mechanical Key

CE Approval RFID Card Lock(9000RL-M)